PLASMA COMPOSITION AND SiO2 ETCHING KINETICS IN CF4/C4F8/Ar/He MIXTURE: EFFECTS OF CF4/C4F8 MIXING RATIO AND BIAS POWER
Abstract
Gas-phase characteristics as well as reactive-ion etching kinetics of silicon dioxide in CF4/C4F8/Ar/He plasma with variable CF4/C4F8 mixing ratio and bias potential were investigated under conditions of low (~ 0.05 W/cm3) input power regime. The interest to such regime is due to the possibility to obtain higher etching anisotropy with lower surface damages. The research scheme included plasma diagnostics by Langmuir probes and optical emission spectroscopy in the internal (with no use of standard additives) actinometry approach. It was shown that the substitution of C4F8 for CF4 does not produce sufficient changes in both electrons- and ions-related plasma parameters, but causes a weak increase in fluorine atom density. On the contrary, an increase in the bias power (and thus, in the bias potential) does not disturb plasma composition, but is characterized by proportional changes in the ion bombardment energy. As such, selected variable parameters represent somewhat classical “chemical” and “physical” factors influencing heterogeneous stages of the etching process. It was found that the dominant contribution to the SiO2 etching process belongs to its chemical component while bias powers above 400 W provide no dependence of Si(s.) + xF → SiFx (where index (s.) points out the particle situated on the surface) reaction probability on the efficiency of ion-induced production of adsorption sites for fluorine atoms, as SiOx(s.) → Si(s.) + xO. At lower bias powers, the presence of such dependence is confirmed by similar changes of effective reaction probability and ion bombardment intensity, traced by the multiplication of ion flux on square root of ion energy. Some suggestions concerning peculiarities of both gas-phase and heterogeneous process kinetics at low plasma densities were made.
For citation:
Efremov A.M., Kwon K.-H. Plasma composition and SiO2 etching kinetics in CF4/C4F8/Ar/He mixture: effects of CF4/C4F8 mixing ratio and bias power. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2022. V. 65. N 10. P. 47-53. DOI: 10.6060/ivkkt.20226510.6604.
References
Wolf S., Tauber R.N. Silicon Processing for the VLSI Era. V. 1. Process Technology. New York: Lattice Press. 2000. 416 p.
Nojiri K. Dry etching technology for semiconductors. Tokyo: Springer Internat. Publ. 2015. 116 p. DOI: 10.1007/978-3-319-10295-5.
Advanced plasma processing technology. New York: John Wiley & Sons Inc. 2008. 479 p.
Lieberman M.A., Lichtenberg A.J. Principles of plasma discharges and materials processing. New York: John Wiley & Sons Inc. 2005. 757 p. DOI: 10.1002/0471724254.
Standaert T.E.F.M., Hedlund C., Joseph E.A., Oehrlein G.S., Dalton T.J. Role of fluorocarbon film formation in the etching of silicon, silicon dioxide, silicon nitride, and amorphous hydrogenated silicon carbide. J. Vac. Sci. Technol. A. 2004. V. 22. P. 53-60. DOI: 10.1116/1.1626642.
Schaepkens M., Standaert T.E.F.M., Rueger N.R., Sebel P.G.M., Oehrlein G.S., Cook J.M. Study of the SiO2-to-Si3N4 etch selectivity mechanism in inductively coupled fluorocarbon plasmas and a comparison with the SiO2-to-Si mechanism. J. Vac. Sci. Technol. A. 1999. V. 17. P. 26-37. DOI: 10.1116/1.582108.
Kastenmeier B.E.E., Matsuo P.J., Oehrlein G.S. Highly selective etching of silicon nitride over silicon and silicon dioxide. J. Vac. Sci. Technol. A. 1999. V. 17. P. 3179-3184. DOI: 10.1116/1.58209.
Donnelly V.M., Kornblit A. Plasma etching: Yesterday, today, and tomorrow. J. Vac. Sci. Technol. 2013. V. 31. P. 050825-48. DOI: 10.1116/1.4819316.
Efremov A., Murin D., Kwon K.-H. Concerning the Effect of Type of Fluorocarbon Gas on the Output Characteristics of the Reactive-Ion Etching Process. Russ. Microelectronics. 2020. V. 49. N 3. P. 157-165. DOI: 10.1134/S1063739720020031.
Efremov A., Murin D., Kwon K.-H. Plasma parameters, densities of active species and etching kinetics in C4F8+Ar gas mixture. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2019. V. 62. N 2. P. 31-37. DOI: 10.6060/ivkkt.20196202.5791.
Efremov A.M., Murin D.B., Kwon K.-H. Plasma parameters and active species kinetics in CF4+C4F8+Ar gas mixture. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2018. V. 61. N 4-5. P. 31-36. DOI: 10.6060/tcct.20186104-05.5695.
Efremov A., Lee B. J., Kwon K.-H. On Relationships Between Gas-Phase Chemistry and Reactive-Ion Etching Kinetics for Silicon-Based Thin Films (SiC, SiO2 and SixNy) in Multi-Component Fluorocarbon Gas Mixtures. Materials. 2021. V. 14. P. 1432(1-27). DOI: 10.3390/ma14061432.
Lim N., Efremov A., Kwon K.-H. A comparison of CF4, CHF3 and C4F8 + Ar/O2 Inductively Coupled Plasmas for Dry Etching Applications. Plasma Chem. Plasma Process. 2021. V. 41. P. 1671-1689. DOI: 10.1007/s11090-021-10198-z.
Veselov D.S., Bakun A.D., Voronov Yu.A. Reactive ion etching of silicon using low-power plasma etcher. J. Phys.: Conf. Ser. 2016. V. 748. P. 012017(1-4). DOI: 10.1088/1742-6596/748/1/012017.
Ashraf M., Sundararajan S.V., Grenc G. Low-power, low-pressure reactiveion etching process for silicon etching with vertical and smooth walls for mechanobiology application. J. Micro/Nanolith. Mems Moems. 2017. V. 16. P. 034501(1-8). DOI: 10.1117/1.JMM.16.3.034501.
Osipov A.A., Aleksandrov S.E., Solov’ev Yu.V., Uvarov A.A. Etching of SiC in low power inductively-coupled plas-ma. Russ. Microelectronics. 2018. V. 47. N 6. P. 427-433. DOI: 10.1134/S1063739719010074.
Johnson E.O., Malter L. A floating double probe method for measurements in gas discharges. Phys. Rev. 1950. V. 80. P. 58-70. DOI: 10.1103/PhysRev.80.58.
Shun’ko E.V. Langmuir probe in theory and practice. Boca Raton: Universal Publ. 2008. 245 p.
Lopaev D.V., Volynets A.V., Zyryanov S. M., Zotovich A.I., Rakhimov A.T. Actinometry of O, N and F atoms. J. Phys. D: Appl. Phys. 2017. V. 50. P. 075202 (1-17). DOI: 10.1088/1361-6463/50/7/075202.
Gray D.C., Tepermeister I., Sawin H.H. Phenomenological modeling of ion-enhanced surface kinetics in fluorine-based plasma-etching. J. Vac. Sci. Technol. B. 1993. V. 11. P. 1243-1257. DOI: 10.1116/1.586925.
Seah M.P., Nunney T.S. Sputtering yields of compounds using argon ions. J. Phys. D: Appl. Phys. 2010. V. 43.
P. 253001 (1-24). DOI: 10.1088/0022-3727/43/25/253001.
Chapman B. Glow Discharge Processes: Sputtering and Plasma Etching. New York: John Wiley & Sons Inc. 1980. 432 p.
